Mold in a wall almost always follows a hidden moisture source such as a pipe leak, a roof or window leak, or water that wicked up from below. Removal means finding and fixing the source, opening the wall, taking out wet or moldy materials and drying the cavity before it is closed. Call the number on this page to be connected with a local mold company in Los Angeles.

What mold in walls means
A wall is a hollow cavity holding framing, insulation, wiring and often plumbing. When water gets in and stays, mold can grow on the back of drywall, on the wood studs and in the insulation long before anything shows on the paint. By the time you see a stain or smell mustiness, the damage behind the surface is usually larger than the visible patch.
Where it shows up in Los Angeles homes
Many Los Angeles houses and apartments are wood frame with stucco on the outside. Stucco can crack and let winter rain reach the sheathing, and window flashing that has aged lets water in at the corners. Inside, supply lines and drain lines in bathroom and kitchen walls leak slowly. In older Spanish and Craftsman homes, plaster and lath walls can hold moisture differently from modern drywall. Hillside lots add runoff against the foundation, which can push dampness up into the lower wall.
How the work usually goes
- Find the moisture source, using visual checks and often a moisture meter, and stop it. Cleaning mold without fixing the leak invites regrowth.
- Contain the area with plastic barriers so dust and spores stay out of the rest of the home.
- Cut out and bag wet or moldy drywall and insulation. CDPH advises removing porous materials that look or smell moldy.
- Clean and dry the studs and cavity. EPA stresses drying water-damaged areas within 24 to 48 hours.
- Rebuild the wall once it is dry.

Cost
A Los Angeles cost guide puts mold remediation at roughly $14 to $27 per square foot, or about $1,400 to $2,700 for a 100-square-foot area. National figures for mold in drywall range from about $1,000 for surface growth to $20,000 or more for full removal. The spread depends on how much wall is opened and whether plumbing or stucco repairs are part of the job.
DIY or hire out
EPA says that if the moldy area is less than about 10 square feet, you can in most cases handle the cleanup yourself. Mold inside a wall cavity, or where the source is unknown, is a different situation. If you have health concerns, talk with your doctor.
License and permits
There is no California mold license, but jobs of $1,000 or more in labor and materials require a CSLB license, which you can check on the CSLB site. Rebuilding walls can involve permits; in the City of Los Angeles, LADBS issues them, and its guide says to ask before starting repair work.
Renters
State housing law lists visible mold growth as a substandard condition, with an exception for minor mold on surfaces that normally collect moisture. Tell the landlord in writing; in the City of Los Angeles, the Los Angeles Housing Department takes rental complaints.
Mold in Walls questions from Los Angeles homeowners
Can I just paint over mold on a wall?
How do I know if mold is inside a wall?
Does the whole wall have to come out?
Is bleach a good way to treat wall mold?
Related mold services in Los Angeles
Helpful guides
Mold in Walls in nearby cities and towns
Los Angeles County
Orange County
Ventura County
Sources
- EPA: A Brief Guide to Mold, Moisture and Your Home
- EPA: Mold Cleanup in Your Home
- CDPH: Frequently Asked Questions about Mold
- CSLB: What Kind of Contractor Do I Need?
- CSLB Online License Lookup
- Mold Remediation Cost in Los Angeles, California
- Bob Vila: Mold Remediation and Removal Costs
- LADBS Homeowner's Guide to Permits and Inspections
Last updated: