A stain, a bubble in the paint or a musty smell near one wall can mean the cavity behind it is wet. EPA advises fixing the moisture problem first and drying wet materials within 24 to 48 hours. Call the number on this page to be connected with a local mold company in Van Nuys.

When a wall looks fine but smells wrong
Not every wall with mold behind it shows a mark. Insulation and the back face of drywall can grow in the dark while the painted side stays clean. If one corner of Van Nuys living space smells damp and nothing is visible, a moisture check is the sensible next step.
Apartments, condos and shared walls
In multi-unit buildings, the water may start in the unit above or next door. A leaking stack, a washer hose or a neighbor's overflow can soak a shared wall. Tracing the source matters, and it often involves the landlord or building manager. Those are the same weak spots a company checks first.
Homes in Van Nuys from the 1960s often have original pipes inside the walls, and fittings that old can weep slowly into the cavity without any visible sign.
Around Van Nuys, long hot stretches keep AC systems busy, and a clogged drain line or an uninsulated duct can dampen the wall beside the air handler.

Access and finishes
Tile, stone, built-in cabinets and plaster take longer to open and repair than plain drywall. Walls behind a kitchen run or a tub enclosure add labor for protecting nearby finishes. Those details move the figure more than most people expect. A site visit usually settles how large the repair will be.
How a company decides where to cut
A pro does not tear out a whole wall on a hunch. Meter readings mark the wet zone, and a small hole confirms what is inside. Then the opening is sized to reach clean, dry material on all sides, which keeps repairs smaller. Cutting only what is needed saves money and time.
Urgent versus can wait a day
An active leak, a soaked wall after a burst pipe or a spreading stain deserves a quick call. A faint old mark with no smell and no moisture is less pressing, but it is still worth having someone confirm that the cavity is dry. When in doubt, a quick check costs far less than a larger repair.
Local details for Van Nuys
The state of California doesn't license mold remediation as its own trade. The Contractors State License Board does license contractors, and any job priced at $1,000 or more (labor plus materials) calls for that license.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether the Los Angeles Department of Building and Safety needs to be involved.
Renting? California housing law lists visible mold growth among substandard conditions, and the Los Angeles Housing Department handles substandard-housing complaints for Van Nuys addresses.
Companies that take calls here usually also work in Panorama City, North Hills and Sherman Oaks.
More about Van Nuys
Calls come in from across Van Nuys, including around Van Nuys Boulevard, Van Nuys Airport, Valley Municipal Building.
About 67% of housing units were built before 1980.
Mold in Walls questions in Van Nuys
How big a hole do they cut to check a wall?
Is wall mold the same as mold on the surface?
Can I clean a small spot of mold on a wall myself?
What does a thermal camera show in a wall?
More mold services in Van Nuys
Mold in Walls nearby
Helpful guides
Sources
- Los Angeles Department of Building and Safety
- Los Angeles Housing Department: housing complaints
- CSLB: What kind of contractor do you need?
- California Health and Safety Code 17920.3
- EPA: A Brief Guide to Mold, Moisture and Your Home
- California Department of Public Health: Mold
- Van Nuys housing by year built
Last updated: