Published cost guides put mold remediation in Los Angeles at roughly $14 to $27 per square foot, but the final quote depends on the materials, the area and the moisture source. This guide lays out the ranges, where each comes from, and how to compare quotes.
Quick cost estimator
Typical ranges from the sources cited below, not a quote. The company you hire will price the actual job.
The short answer
A Los Angeles cost guide from HomeBlue lists mold remediation at about $14 to $27 per square foot. For a 100 square foot area that is roughly $1,400 to $2,700. HomeAdvisor, which also lists Los Angeles, gives a typical range of $1,337 to $3,315 per job, with an average of $2,459. These are published estimates, not quotes, and your price can land outside them. A real number only comes after a company has looked at the damage.
The ranges below come from published cost guides. We name the area each one covers, because a national figure and a Los Angeles figure are not the same thing.
Cost by size of the affected area
The Los Angeles HomeBlue figures scale with square footage:
| Affected area | Typical range | Area covered |
|---|---|---|
| 100 square feet | $1,400 to $2,700 | Los Angeles |
| 500 square feet | $6,800 to $13,700 | Los Angeles |
| 1,000 square feet | $13,700 to $27,300 | Los Angeles |
National figures run a little lower. This Old House lists $10 to $25 per square foot and $1,200 to $3,750 for a typical job. For a whole house it lists $10,000 to $30,000. Use the national numbers as a cross-check, not a budget.
Cost by type of job
Some jobs are priced by location rather than by square foot. These are national ranges from published guides, so Los Angeles labor and disposal costs may push them higher:
- Crawl space mold removal: $500 to $2,000 (This Old House). See crawl space and attic mold removal.
- Attic mold removal: $1,000 to $4,000 (This Old House) or $1,500 to $9,000 (Fixr).
- Air duct mold remediation: $600 to $2,000 (Bob Vila). See AC and duct mold removal.
- Full AC or HVAC mold cleaning: $3,000 to $10,000 (This Old House).
- Black mold removal: $800 to $7,000 (Bob Vila and Fixr). Color does not set the price; the area and materials do. See black mold removal.
- Mold in drywall: about $1,000 for surface mold, up to $20,000 or more when walls must be removed (Bob Vila and SERVPRO). See mold in walls.
Inspection and testing are separate costs
Most remediation quotes do not include an inspection, and a company that finds the problem may not be the one that fixes it. A California cost page from homeyou lists mold inspection at $291 to $459 for 500 square feet. Fixr lists a standalone inspection at $450 to $800 nationally. Lab testing adds to that: one testing guide puts a pre-remediation assessment with sampling at $400 to $900 and a post-remediation clearance test at $300 to $700 for a home. For the difference between the two services, read mold inspection vs mold testing, and see mold inspection and clearance testing for what each visit involves.
What moves the price up or down
Two jobs of the same size can price very differently. The main drivers are:
- Materials affected. Mold on a tile surface can be cleaned. Mold in drywall, insulation or subfloor usually means demolition and rebuilding.
- Access. A crawl space with a low clearance, an attic with ducts in the way, or a second-floor wall all add labor.
- Containment. Larger jobs need plastic barriers, negative air machines and protective gear, which add setup time.
- The moisture source. Fixing a leaking supply line or a failed roof section may be a separate plumber or roofer invoice. Remediation does not last if the water keeps coming.
- Rebuild work. Many remediation quotes cover removal only. New drywall, paint and flooring may be extra, and the guides above do not say how they treat it, so ask.
Cost calculator
The calculator on this page adds up the sourced ranges for the jobs you pick. It shows a low and a high total, nothing more. If your situation does not match any listed job, it will not give you a number, and neither should anyone who has not seen the damage.
Why Los Angeles jobs have their own pattern
Local building types shape the work. Many older Los Angeles homes sit on raised wood foundations, so a plumbing leak can soak the subfloor and framing in a crawl space where nobody looks for months. Tract homes on slabs hide supply lines in the slab or in walls, and a slab leak can wet flooring and baseboards before any stain appears. Stucco and flat roofs let winter rain find a way in, and attic ducts for air conditioning sweat in warm weather. Apartments and condos add a neighbor's leak to the list. Each of these changes the access, the demolition and the rebuilding, which is why a per-square-foot figure only goes so far. Our guide to crawl space mold under raised foundations describes the most common hidden case.
Three examples of how to read the ranges
These are illustrations built from the published ranges, not quotes. A small bathroom wall near a leaking shower valve, about 100 square feet of affected area, sits at the low end of the Los Angeles table: roughly $1,400 to $2,700. A moldy crawl space under a bungalow could fall in the national crawl space range of $500 to $2,000, but only if the growth is limited and the access is easy. A roof leak that wet several rooms and the attic can quickly move into the 500 square foot row, where the Los Angeles range is $6,800 to $13,700. If a company gives you a number far outside the published range for a job like yours, ask what is driving it.
Ways to keep the cost from growing
Mold spreads while materials stay wet, so speed matters more than anything else you can do. Stop the water source, dry the area, and call a company early. EPA says the key to mold control is moisture control. A small area caught early may be something you can clean yourself: EPA says that under about 10 square feet you can in most cases handle it, and our guide to DIY cleanup versus hiring a pro explains where the line is. Larger or hidden growth is a different job. Sharing photos, the date of the leak and any plumber's invoice with the company helps it scope the work accurately.
Will insurance pay?
The California Department of Insurance says mold damage caused by a covered peril may be covered under a homeowners policy, and advises reporting any water damage claim to your agent or company right away. A slow leak that went unfixed is treated differently from a sudden burst pipe, so read your policy and ask your carrier before work begins. Renters should tell the landlord in writing; the owner's policy and the lease decide who pays. Our guide to mold in California rentals covers the tenant side.
How to compare quotes
Get the scope in writing. A usable quote lists the rooms or square footage, the materials to be removed, the containment method, whether disposal is included, and whether the quote covers rebuild. Ask what happens if more mold is found once the wall is open.
California has no state mold license, according to CDPH. CSLB says anyone who contracts for work worth $1,000 or more in labor and materials must hold a current CSLB contractor license. Look up the license number on the CSLB site before you sign. More detail is in California mold rules: what to check before you hire.
Be careful with a quote that is far below the others, and with one that asks for the full amount up front. Ask about the plan for the moisture source, and whether the company recommends clearance testing afterward. CDPH and CDC do not recommend routine mold testing, so a company that pushes testing as a first step should be able to explain why. If you have health concerns about mold in your home, talk with your doctor.
Before you call
Photograph the damage, note when you first saw it, and find out whether water is still getting in. Shut off a leaking supply line if you can do so safely. EPA advises drying water-damaged areas within 24 to 48 hours, and our guide to the first 48 hours after a leak covers what to do in that window. For the full sequence of a job, see what happens during remediation. To compare services, start at all mold services.
Frequently asked questions
How much does mold removal cost per square foot in Los Angeles?
Does the quote include fixing the leak?
Is mold inspection included in remediation cost?
Will homeowners insurance cover mold?
Sources
- Mold Remediation Cost in Los Angeles, California (HomeBlue)
- How much do mold removal services typically cost? (HomeAdvisor)
- How Much Does Mold Remediation Cost? (This Old House)
- Mold Remediation and Removal: What to Know and How Much You'll Pay (Bob Vila)
- Mold Remediation Cost (Fixr)
- Mold inspection costs in California (homeyou)
- Mold Remediation Air Quality Testing: Clearance Testing Explained (InspectandTest)
- CSLB: What kind of contractor do you need?
- California Department of Insurance: Residential Property Claims Guide
- EPA: A brief guide to mold, moisture and your home
Last updated: